Magnesium Phosphate Repair Mortar
EUCO-SPEED MP is a rapid-setting, rapid hardening, magnesium phosphate material used to repair concrete and masonry surfaces. EUCO-SPEED MP requires only the addition of water and can be installed with standard equipment and procedures. It bonds tenaciously to properly prepared concrete and provides a durable repair which is resistant to freeze-thaw cycles and deicing salts. For temperatures above 85°F (29°C), EUCO-SPEED MP HOT WEATHER should be used. For large placements use EUCO-SPEED MP HOT WEATHER extended with pea gravel.
Features & Benefits
- Rapid-setting for quick turnaround
- Suitable for both interior and exterior applications
- Durable under freeze-thaw cycles and salt exposure
- Versatility in thickness from 1/2” (12 mm) to 8” (20 cm) when extended with aggregate
- May be placed down to 0°F (-17°C)
- Can contribute to LEED points
Applications
- Bridge decks
- Anchoring
- Parking garages
- Floors
- Hand rail grouting
- Pavements
- Marine structures
- Joint repairs
Specifications / Compliances
- ASTM C928 - Standard Specification for Packaged, Dry, Rapid-Hardening, Cementitious Materials for Concrete Repairs
- Canadian Food Inspection Agency, MTQ, MTO
Packaging
EUCO-SPEED MP is available in 50 lb (22.7 kg) bags or pails. Yield: Approximately 0.42 ft3 (0.012 m3) of mortar when mixed with 0.45 gal (1.7 L) of water. For areas deeper than 1” (25.4 mm), EUCO-SPEED MP must be extended with up to 30 lb (13.6 kg) of 3/8” (9.5 mm) pea gravel*. Yield will increase to approximately 0.57 ft3 (0.016 m3) per unit. * Use only dust free, properly graded hard aggregate. Never extend EUCO-SPEED MP with limestone or aggregate containing limestone.
